Steady shot, rear motorcycle cam
by Editor on 06/19/18
In our ongoing pursuit for the steadiest shot possible more upgrades have been done to our rear cam mount. Previously there were three vertical supports, two on the inner fender and the other on the saddlebag "U" support. It was the latter that I suspect was the culprit for vibration.
Keeping the rear camera supports separate from the saddlebag mount should help smooth out the video footage. In order to do this I used two pieces of 1x1x1/4 aluminium angle and bolted that to the existing inner fender mounts, then attached a 1x1x1/4 aluminium flat bar above the licence plate holder for additional rigidity.
Comments (0)
