Harley-Davidson V Rod VRSCA 100th year Anniversary motorcycle
Harley-Davidson V Rod parts for sale
<---- Connect with VRIDETV in social media ----->
For sale
2003 Harley Davidson VRSCA VROD TSM (Turn signal module)
Part number: 68922-00B
For sale:
Genuine Harley Davidson stock 3.7 gallon OEM fuel tank part number: 62921-01
fits 2002 2003 2004 2005 2006 VRSC V-Rods
price: $95USD plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page
For sale:
Genuine Harley-Davidson VROD Front and Rear Brake Calipers
Front right brake caliper assembly: part number: 44451-01C
Front left brake caliper assembly: part number: 44452-01C
Rear caliper assembly: part number: 4457-01B
These came off a 2003 Vrod with only 29,000kms
$350USD for all three plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page
SOLD: Genuine Harley-Davidson VROD Throttle Body Assembly.
Part Number: 27657-01 I'm selling this one of my 2003 VRSCA that had only 29,000 kms. Comes with idle air control motor and fuel pressure regulator as seen in picture.
price: USD plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page
For sale: Genuine Harley-Davidson VROD Fuel Rail Assembly. Part Number: 27662-01B
I'm selling this one of my 2003 VRSCA that had only 29,000 kms. Comes with injectors, rubber boots and clamps as seen in picture.
price: $170USD plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page
SOLD:
Genuine Harley-Davidson Vrod engine harness. Part Number: 70155-03
I'm selling this one of my 2003 VRSCA that had only 13,000 kms.
price: plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page
For sale:
Genuine Harley-Davidson Vrod starter motor assembly. Part Number: 31717-01K
I'm selling this one of my 2003 VRSCA that had only 13,000 kms.
price: $125USD plus shipping & paypal fees.
If you're interested please click on the contact at the bottom of this page
For sale:
Genuine Harley-Davidson Vrod oil cooler lines. I'm selling these from a 2003 VRSCA that had only 13,000 kms.
price: $95USD EACH or both for $170USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale: 2003 Harley-Davidson Vrod
Front engine mount pn: 16307-01A
Front engine mount bracket pn: 16308-01
Front mount bracket frame pn: 16311-01
Spacer pn: 16312-01
Washers, bolts & studs
This came off a bike with only 29,000 kilometres.
Price $55USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale:
2003 Harley-Davidson VRSCA Vrod rear engine mount pn: 16298-01
Rear engine mount bracket pn: 16299-01
Right Spacer pn: 48387-01
this came off a bike with only 29,000 kilometres.
Price $35USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale:
2003 Harley-Davidson VRSCA Vrod
Tank to vapor valve tube assembly pn: 27378-01
Vapor valve pn: 62150-85
This came off a bike with only 29,000 kilometres.
Price $20 USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale:
2003 Harley-Davidson VRSCA Vrod
Pivot shaft assembly pn: 48392-01
This came off a bike with only 29,000 kilometres.
Price $70 USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale:
2003 Harley-Davidson VRSCA Vrod
Front cross member pn: 48086-01
With rubber gromets for oil cooler posts
This came off a bike with only 29,000 kilometres.
Price $35USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
Check back regularly as more parts will be added to this page
For sale: Genuine OEM Harley Davidson cover secondary clutch actuator cover part number: 34783-01
This came off a bike with only 29,000 kilometres.
Price $30USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale: Genuine OEM Harley Davidson Vrod alternator cover derby cover part number: 25302-01k
This came off a bike with only 29,000 kilometres.
Price $30USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale: Genuine Harley-Davidson VROD swing arm part number: 48372-01
This came off a bike with only 29,000 kilometres. (has scratches but they can be sanded out.)
Price $75USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale: 2003 Harley Davidson VROD cooling fan part number 26724-01
This came off a bike with only 29,000 kilometres.
Price $125USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale: 2003 Harley Davidson VROD stator assembly part number 30734-01K (Chrome cover not included, stator and wiring only)
This came off a bike with only 29,000 kilometres.
Price $135USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale: 2003 Harley Davidson VROD engine stabilizer link 16306-01
This came off a bike with only 29,000 kilometres.
Price $65USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
Sold: 2003 Harley Davidson VROD footrest clevis part number 42584-01 From a bike with only 29,000 kilometres. Please see the ring of chrome peeled off. plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
SOLD: 2003 Harley Davidson VROD footrest clevis part number 42584-01 From a bike with only 29,000 kilometres. Price $15USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
SOLD: 2003 Harley Davidson VROD 100th anniversary windshield emblem & backing plate. Has some road rash that's why it's only (mint shape ones go for a lot more if you can even find them.)
Plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
For sale: Harley Davidson VROD windshield parts. Attaches bottom of windshield to the horseshoe plate. It does hinge.
Price $35USD plus shipping & paypal fees. If you're interested please click on the contact at the bottom of this page
SOLD: VROD rear master cylinder chrome cover kit 42204-04
After seeing a V-ROD rear master cylinder chrome cover kit part number 42204-04 sell for $ USD on eBay I've decided to put one of mine up for sale.
Price plus shipping & buyer is responsible for all PayPal fees.
Comes with all mounting hardware.
contact info is at the bottom of this page.
For sale
Genuine 2003 Harley Davidson 100th Anniversary VROD emblems for airbox. These are from the gold key package edition and is being sold as a three piece set.
Price: $650 USD plus shipping & buyer is responsible for all PayPal fees.
contact info is at the bottom of this page.
For sale
ONE Genuine 2003 Harley Davidson 100th Anniversary emblem for airbox.
Price: $199 USD plus shipping & buyer is responsible for all PayPal fees.
contact info is at the bottom of this page.
For sale
Genuine 2003 Harley Davidson 100th Anniversary VROD right mirror part number: 91915-01
Price: $35 USD plus shipping & buyer is responsible for all PayPal fees.
contact info is at the bottom of this page.
For sale
Genuine 2003 Harley Davidson 100th Anniversary VROD rear fender supports:
right side 48483-01A
left side 48485-01A
Price: $60 USD plus shipping & buyer is responsible for all PayPal fees.
contact info is at the bottom of this page.
For sale
Genuine 2003 Harley Davidson 100th Anniversary VROD chrome rad hose cover 26782-01A
Price: $45 USD plus shipping & buyer is responsible for all PayPal fees.
contact info is at the bottom of this page.
For sale
Genuine 2003 Harley Davidson 100th Anniversary VROD mudflap with stud plate 59709-01
Price: $25 USD plus shipping & buyer is responsible for all PayPal fees.
contact info is at the bottom of this page.
SOLD
Genuine 2003 Harley Davidson 100th Anniversary VROD Chrome Billet Aluminum Sprocket p/n 4019-01. Please zoom in to see where the chrome has issues.
Price: $180 USD plus shipping & buyer is responsible for all PayPal fees.
contact info is at the bottom of this page.
For sale:Genuine 2003 Harley Davidson 100th Anniversary VROD Chrome Billet Aluminum Muffler Clamp Kit p/n 65271-03. Please zoom in to see where the marks are from previous owner removed them. In my opinion all the marks can be ground down with some effort and these can look good. Price: $180 USD plus shipping & buyer is responsible for all PayPal fees. contact info is at the bottom of this page.
For sale
Genuine 2003 Harley Davidson 100th Anniversary VROD Leg, Jiffy Stand 49733-01A
Price: $55 USD plus shipping & buyer is responsible for all PayPal fees.
contact info is at the bottom of this page.
For Sale: Genuine Harley Davidson GOLD KEY TIN SET FOR SALE:
2003 Harley-Davidson two tone sterling silver & gloss black 100th Anniversary VRSCA VROD seven piece tin set for sale.
It has normal wear for being 19 years old, I pointed out any of the marks extremely close.... most of which you don’t even see when the bike is on the ground & standing beside it.
Price $1,150 USD + shipping & all Pay Pal fees. contact info is at the bottom of this page.
Airbox Cover with both Gold side emblems and the name plate. There is a very small ding in the black that I only found when I was polishing it)
Front Fender with marks pointed out in video
Rear Fender (there was a baseplate on this so there are marks from it, if you are going to be putting a baseplate on you won’t see them)
Left and right Radiator side cover (underside has scrapes, as do most) Seen only when under bike.
Left and right Vented side covers
Will not separate this package and sell individual pieces.
SOLD: Brand new in the box: Unlimited Engineering 5.3 gallon conversion kit for 02-06 VRODS
Price + shipping & all Pay Pal fees. contact info is at the bottom of this page.
• Made in America by Americans for your American motorcycle.
• 5.3 US Gallons (20 Liters) after normalization*. This will yield approximately 5 1/4 gallons of useable fuel capacity which is a 54% increase over stock useable of 3.4 gallons - almost 2 gallons.
• State of the art molding process gives unparalleled safety. The crash testing lab performed tests to American and European safety standards. The tank passed easily. They were instructed to increase the forces until the tank failed. They were unable to achieve a failure even when hitting the tank with many times the force set forth in the standards - they maxed out their equipment without failure.
• Relocates the ignition out from under your butt to an easy to reach and much more natural position for the key.
• Included parts to stop the key fob from flapping in the wind.
• Retains normal operation of the ignition and seat latch.
• Designed to fit 2002-2006 VRSCA, B, D, SE and SE2 models.
Included in the kit:
SuperTank, Tank Strap, NASCAR developed thermal barrier, Ignition Relocation kit
Ignition bracket, Ignition wire harness extension, Extended seat release cable, misc hardware, Skid Plate kit, Formed skid plate, Aluminum Rivets, 3/16" drill bit, Detailed installation instructions, Speciality tool
For Sale:
Genuine Harley-Davidson OEM V-Rod Left and Right Passenger foot rest supports.
These parts are obviously not new and show normal wear for being 19 years old. Came off a 2003 VROD. Part numbers: 50994-01 and 50995-01
$40USD + shipping & all Pay Pal fees. contact info is at the bottom of this page.
For Sale: Genuine Harley-Davidson OEM V-Rod Left and Right black switch housings
These parts are obviously not new and show normal wear for being 16 years old.
$40USD + shipping & all Pay Pal fees. contact info is at the bottom of this page.
this item has been SOLD
this item has been SOLD
this item has been SOLD
this item has been SOLD
this item has been SOLD
this item has been SOLD
this item has been SOLD
SOLD: Genuine Harley-Davidson VROD hard shell saddlebags. After taking them off my bike I used Meguires Scratch X2.0 on the bottoms and was amazed with the results. There are still some marks, scratches and scuffs that I was unable to rub out by hand but a buffing wheel might get even better results. The lids have what I would call normal wear for their age except for the left lid that has some road rash. As you can see In this video I go out of my way to show the blemishes.
I do not have the keys but the bags open and close as they should. One gas shock can hold the lid up, the other cannot. All the mounting bolts, nuts, washers are not OEM. The 4 OEM rubber mounts for the bottom of the saddlebags to the lower mounting brackets were missing so I used 4 mounting blocks from another set of the HD leather bags with rubber added.
Price is $950USD + shipping and all PayPal fees. Contact info is at the bottom of this page if you want to buy them.
For sale: BNIB: Genuine Harley-Davidson VROD Chrome Billet Muffler Clamp Kit. Part Number: 65271-03 These have never been mounted on a bike, comes with all original packaging.
Price: $375USD + shipping & all PayPal fees. Contact info is at the bottom of this page
For sale: Genuine Harley-Davidson brake VROD arm from a 2003 Vrod. Price $95USD + shipping & all PayPal fees,. Contact info is at the bottom of this page.
For sale: Genuine Harley-Davidson brake VROD Reactor 72T pulley from a 2005 VRSCSE CVO VROD.
*CHROME HAS ISSUES, zoom in to see.
Price: $195USD + shipping & all PayPal fees.
Contact info is at the bottom of this page.
For sale: Genuine Harley-Davidson brake VROD shifter lever with shift lever peg.
Price: $95USD + shipping & all PayPal fees.
Contact info is at the bottom of this page.
For sale: Genuine Harley-Davidson wiring harness, plug, switches for horn, lights & turn signal. As seen in this picture. Came off a 2003 Vrod with only 29,000 kilometres on it.
Price $95USD + shipping & all PayPal fees. .
Contact info is at the bottom of this page.
SOLD
Sale Pending
For Sale: Corbin Beatle Bags 2002 - 2006 Vrods saddlebags
These Corbin Beetle bags are even more rare than the Harley-Davidson hard shell saddlebags & are almost double in capacity size.
The colour is orange/orangey red/red, depending on the lighting.
I was going to have them sanded down & painted 2 tone blue with graphics to match my CVO but the cost of the paint job has got me second guessing my initial thoughts...
That, and this blue CVO Vrod has become a money pit... I have sunk so much money into restoring this thing it's crazy and I keep finding more things wrong with it...
These Corbin saddlebags are no longer available & have been discontinued for quite some time, but when they were the price was $2,000USD + tax + shipping and were not painted. I don't mean this paint job I mean no paint at all on them....
When I bought them I was told they were in excellent condition, well I have a different opinion on that. On the inside of the lid on one of the saddle bags I noticed what appears to be a defect in the lid at the hinge site, still open and closes fine but not pristine like the other one. Also noticed what I would call spider web cracking in area of the bottom of the same lid (possibly dropped on the lid when handling?). Seems someone had made some homemade mounting brackets for them & in order to get them to fit they drilled an extra hole in each saddlebag, not too big of a deal, but WHY! Because of those brackets one of the saddlebags has made contact with the shock taking a small piece of the fibreglass off. Lastly there were no keys for the locks.
So I reached out to Corbin & they did a "special order" and made a set of original mounts for me. The brackets fit the bike perfectly BUT the studs don't match up to the holes on the saddlebags. I cut the one stud off that was out the most, then I was able to slide the bag onto the two studs but the shock doesn't line up in the well. Going to have to remove the two studs, secure the bag in the proper position for the shock & shock relief in the bag and also space the turn signal lens. Then I'll be able to put some bolts through the inside of the bags to see where the contact points are on the mounts on the bike and have the studs welded there, looks like they need to be moved a half inch to the right. Not a big deal just some extra tinkering.
The plan was to sand these down & paint them two tone dark candy blue and light candy blue with matching graphics airbrushed like the airbox and rear fender but just about when I found out how much that was going to cost....
I'm already into these bags for over a $1,300 USD and can't justify spending another $1,500 - $2,000 on a custom paint job.
So, like I mentioned at the beginning of this long post I'm thinking on selling them.
Just looking to get the $1,300 I'm into them for.
Price $1,300USD + shipping and all PayPal fees. If you would like to buy them click here
this item has been SOLD
this item has been SOLD
