VROD floorboards disassembled
by Editor on 03/06/24
Decided to take the floorboards apart for cleaning, during re-assembly I used anti seize on the pins with blue locTite on the threads. I also switched the left & right floorboards so the best looking one is on the right side. Then used little silver touch up paint on a few chips on the mounts.
Tip: put some grease in the holes before inserting springs to hold them in place & a dab on the spot where the ball bearing sits to prevent it from taking off on you.
Also: The mounts are steel & the floorboards themselves are aluminum in case you're wondering and weigh 3.136 pounds each.
Comments (0)
